This gorgeous ring by Sharon features a Koroit boulder opal stone from Australia set in a handmade, unique and one-of-a-kind setting. The beginning metalsmiths produced their first bezel-set stone project this week! Sharon created the bezel out of bezel wire, soldered it closed (after many attempts!!!!!) and then soldered it to the silver base sheet. She then artistically arranged the silver wires to complement the internal design of the stone and soldered on a ring shank. She then oxidized and closed the bezel, and gave it a last buffing with fine sandpaper before calling it done!
This organic collage was done by Tara. It is completely original and comes directly from her sketchbook. She cut out, textured, and shaped the copper flowers and soldered them onto a base sheet of sterling that she also cut-out and textured. Sterling silver vines were also soldered onto the base sheet and the whole piece was oxidized and buffed to bring out the texture and contrast. A gorgeous and unusual piece!
This ring by Monique also is her first bezel project. She chose an Imperial Jasper stone cabochon and wanted to compliment the internal movement of the stone by creating an undulating pattern of sterling silver wires and balls. She created the bezel wall and then soldered it and the wires in stages onto the base sheet.
After creating and soldering on a ring shank, closing the bezel, and MUCH polishing, this beauty is done!
This delicate and beautiful chain by Joan is the last project in the chain-making class. This required no soldering, which pleased the students very much! 2" lengths of 20 gauge wire were bent and balled up, then folded and linked to create this deceptively simple chain. Joan even created the clasp! Nice work!
Susan created this intricately patterned and beautiful ring. A blue glass stone with flecks of gold, blue and black features in this ring bordered by a gorgeous twist wire which Susan soldered around the brass bezel which is also soldered to the base sheet. She then created the ring shank out of the same patterned twist wire soldered between 2 plain round wires, soldered it onto the back, trimmed up the base sheet, polished, and set the stone. Lovely!
This ring by Tara features a white-based triangular opal in the center whose fire is not fully captured by these pictures. She then designed a petal pattern specifically around the stone in 2 layers, all soldered on top of each other. After spending some time forming the ring shank and soldering it on, she polished the tips of the petals, oxidized and buffed, and set the stone.
Tara's ring is large and has a great presence. The oxidation contrasts very effectively against the white stone. Nice job!
This is a cloak pin by Casteen. It's a rather large pin and took her some time to make! Because it's large, she combined soldering with wire-wrapping to attach all her parts. She soldered stone bezels and wire loops onto silver, copper, and brass "leaves", and then used the soldered-on wire to wire-wrap at the ends of the large square copper wire support. She then tumbled the piece to add some shine, added the pin stem, set the stones and took a much-deserved break!
This is Monique's collage pendant. She used a mixed-metal look to add interest and contrast. A square copper wire was soldered on to a textured silver back sheet, and a brass "knot" and silver ball were also soldered on. A bezel was created for a citrine nugget, soldered on, and the whole piece was shined to PERFECTION before the stone was set and bail added. Did I mention how nice and shiny this piece was!?All the students have worked so hard on technique and design. It hasn't been easy! Next week- final projects for the Winter session!
No comments:
Post a Comment